View Single Post
Old 07-19-2010, 10:33 AM   #87 (permalink)
Roselyn
Dark Force Defense League


DMAC & DoM
Kappa
 
Roselyn's Avatar
 
Join Date: May 2009
Location: Western US
Posts: 14,683
x9 x8
Default post 10
Super Slytherin Buddy | | ⅓ She-Snake Trio | | a normal girl with normal knees

Lining up the hinge to the top and back pieces of the house, the Slytherin grabbed one of the smaller nails and hammer before lining up the nail into the little hole of the small golden hinge. Tapping the hammer onto the nail slight so it stayed in, she then picked up the evil power drill once more before drilling the nail into the wood.

And that NOISE! It was annoying! She was soooo happy she only had to hear it three more times!

Repeating the process again in the other hole of the hinge, and ending with the power drill, Evelyn set the house up right for a moment to see if she had placed the hinges on correctly. Opening the top lid, she expected the one side that didn't have a hinge act all wonky, which...it did, but she was surprised to see that she had in fact, placed the first one on properly.

Hehehehehehehehehehe....

Open...

Close...

Open...


Cloooooooose.

Yush. It was working properly. Smirking at her obvious genius...ness... the Slytherin placed the house back to laying on the front piece before starting on the second golden hinge. Aw, she should've thought of using silver! Oh well. She just wanted to be done with it.

After only about another five minutes, and making sure everything line up as perfectly as it could be, the second hinge was on, and she was pretty much done with her project. YEESSSS!

NOW THE FUN PART! Mwahahahaha!

SPOILER!!: Niffler House Plans

Niffler House

Step 1: Gather tools and things needed.
- 7 pieces of good sturdy wood. (will cut to size later)
- 1 saw
- 1 power drill
- 1 hammer
- Nails
- Glue
- Two hinges
- 1 ruler/yard stick
Step 2: Cut wood pieces
-Front/Back: 12" x 24"
-Sides: 12" x 14"
-Wall divider: 7" x 11"
-Top/Roof: 7" x 24"


Step 3: Take one of the side pieces, and create a 8" x 6" door in the side. (will be the door to get into the house)

Step 4: Start Building the house!
-Lay out the pieces to show where they are to go.
-Pre-drill each screw hole.

-Assemble the house.
-Connect wall divider to bottom.
-Add the front and back.
-Add the sides.
-Add the top. (use hinges)
Step 5: Paint!

SPOILER!!: plans




__________________
Roselyn is offline