Thread: Astronomy 1
View Single Post
Old 03-14-2011, 01:27 AM   #121 (permalink)
PadfootAndTheWolf
formerly: DanialRadFAN01


Bicorn
 
PadfootAndTheWolf's Avatar
 
Join Date: Sep 2008
Location: On SS of course!
Posts: 16,991

Hogwarts RPG Name:
Kiera Burton

x6
Default Post #4
Gaga Mafia Monster : MURPHY : Kelvin's SS!BFAM : Roro's Evil Twin : Ravlyndor : Gopher

SPOILER!!: Cleaning instructions

1. Use the cleaning solution provided and apply with a soft cotton towel a light layer.
2. Allow to air dry for a minute, before applying another coat of cleaning solution and rubbing it onto the looking glass and all over the telescope. Keep the rubbing to clockwise circular motions and continue until you've done all over the scope.
3. Take a fresh towel and rub in the same direction to towel dry the scope.
4. Repeat steps 1-3 as necessary until dust and debris is gone
5. Once the scope is clean, spray a thin layer of holding cream over the scope to help prevent future dust outbreaks.
6. Allow the solution to dry fully before operating the telescope. This may take up to 24 hours.

Dragging another new towel over to his work area, Riley dipped it into the cleaner again and this time used some real elbow-grease and watched as the dirt and dust began to really come off. He was kicking himself now for thinking that minimum effort was going to get him places.

Acomplishing the task of getting the telescope covered was over quickly and he then began step two again, by using another towel to rub the stuff in with a clockwise motion after it had sat for a minute. Finally he got another towel and rubbed the sadly-repetitive cleaner fully into the body and lense of the telescope with the same clockwise motions. It was about time he could get to step five!
PadfootAndTheWolf is offline